Efflorescence-Curing System for Concrete & Masonry
Interesting. Tell me more about EffLock's unique chemistry.

EffLock is a proprietary engineered product system containing nano-fusion composites in aqueous solutions that react with impurities, such as calcium and mineral-based salt. These contaminants can be found in mortar mixes, cement products and aggregates. This reaction permanently binds the impurities and prevents efflorescence salt from leaching out to the surface.

The nanotechnology of EffLock's chemistry is approximately 100,000 times smaller than even the smallest cement particle. This allows it to literally pass through cement minerals or (hollow) sand and become part of the mineral with which it reacts. EffLock reacts when hydrogen is present; it stops reacting when the concrete dries out, but will react again when the concrete gets wet again--further improving the ability to lock out efflorescence.
© 2014 NewLook International, Inc. ALL RIGHTS RESERVED

EffLock Features & Benefits

• Cures primary & secondary efflorescence permanently

• Increases density & green strength

• More efficient & cleaner curing process helps stabilizes & brighten integral colors

• Potential to reduce integral pigment loading due to improved color result

• Helps improve the reaction of densifiers and penetrating sealers by binding contaminants that inhibit efficiency

• Improves the long-term bonding of paint & sealers that are often compromised with an inefficient cure efflorescence

• Helps improve the curing process & results in improved cosmetic appearance with fewer air pockets or pinholes

• Provides excellent moisture screen

• May be used with all cement types, including lime, calcium, alpha & beta gypsum, fly ash, volcanic ash & hydraulic cement

• Very eco-friendly; no Volatile Organic Compounds (VOC’s)
EffLock reacts with & binds sodium (NaCl) impurities at the nanomolecular level.
Admixture Container Sizes

LIQUID ADMIXTURE:
•  16 oz (500 mL); 1 lb (0.45 kg)
•  1 Gallon (3.78 Liters); 8 lbs (3.63 kg)
•  5 Gallons (18.72 Liters); 40 lbs (18.14 kg)
•  55 Gallon (208 Liters) Drums; 440 lbs (200 kg)
•  275 Gallon (1040 Liters) Totes

Downloads

EffLock Liquid Admixture Technical Data Sheet
EffLock Liquid Admixture MSDS
NewLook EffLock Admixture Specification 04
What is Efflorescence?

Efflorescence occurs when moisture in concrete and masonry migrates to the surface and carries salt minerals that react with air to create calcium carbonate. It is typically manifested as an unsightly, white chalky deposit on the surface. And it can be difficult to remove.
​What is EffLock?

NewLook’s EffLock™ is an efflorescence-curing system for cement and masonry. It's truly revolutionary because it permanently prevents and completely eliminates both primary and secondary efflorescence. Unlike other admixtures that try to reduce efflorescence by slowing water intrusion, EffLock's nano-fusion chemistry actually uses the presence of water to react with and bind minerals, chlorides, salts deposits and other impurities of concrete mixes at the nano-molecular level. It converts these into harmless matter that becomes part of the concrete. This keeps efflorescence from leaching out onto brick, block and other mortar set products permanently; it is also excellent for pre-cast and poured-in-place concrete.

EffLock admixtures are guaranteed* to permanently stop efflorescence when mixed according to instructions. EffLock products are specifically formulated for cement and mortar mixes.
So what makes the difference?

Other products react with oxygen or don't react at all. EffLock reacts when hydrogen is present, meaning it needs water (H2O) to react; it stops reacting when the concrete dries out. But EffLock will continue to react each time the concrete gets wet. This prevents the formation of efflorescence for the life of the concrete. But EffLock’s efficient reaction during hydration allows treated concrete to retain moisture longer, which improves the initial curing process and enhances the green strength of concrete.

How does EffLock affect integral colorants, densifiers and the performance of concrete?

A more efficient reaction during the curing process also helps brighten integral colorants because there are fewer chemical impurities present that would otherwise dull the finish. Also, it reduces the amount of integral color pigment needed, which means greater value to concrete professionals. Can I get an AMEN!

EffLock also improves the performance of densifiers and penetrating sealers. It binds contaminants and other salt-based minerals that can inhibit penetrating sealers’ ability to absorb and react. When the excess salt is bound within the slab and more free lime is present, penetrating sealers will penetrate deeper and react more efficiently.

The overall quality of concrete is tremendously improved when treated with EffLock. The cosmetic appearance is improved as the concrete cures properly, resulting in a more uniform finish. Fewer air pockets and pinholes appear during the finishing process. 

EffLock can be used with all cement types and ingredients, including lime, calcium, alpha and beta gypsum, fly ash, volcanic ash and hydraulic cement. Cure and seal products may still be used on EffLock-treated concrete. Other admixtures may also be included in the cement mix. However, EffLock should be added first and mixed with water before other admixtures are introduced to the mixture. This allows EffLock to react properly.
What are the dosage rates for the admixtures?

​LIQUID ADMIXTURE
• 6 – 8 oz (178 – 236 mL) liquid per 100 lbs (45 Kilos) of cement for a 3:1 sand/cement ratio
• 8 – 10 oz (236 – 296 mL) liquid per 100 lbs (45 Kilos) of cement for a 5:1 sand/cement ratio

​POWDER ADMIXTURE
• 3 – 4 oz (89 – 118 mL) powder per 100 lbs (45 Kilos) of cement for a 3:1 sand/cement ratio
• 4 – 5 oz. (118 – 148 mL) powder per 100 lbs (45 Kilos) of cement for a 5:1 sand/cement ratio
• Powder may be added to the dry (cement) mix. A thorough mixing is required to yield the guaranteed result





Note: Dosage rates are approximates and may vary due to the mix and aggregates used. Certain mixes vary in salt and contaminant content. Generally, more problematic mixes may require up to 14 oz per each 100 lbs of cement. Use the EffLock Calculator to calculate material needed.
EffLock Logomark

POWDER ADMIXTURE:
• 32 oz (1000 mL); 2 lbs (0.9 kg)
• 1 Gallon (3.78 Liters); 8 lbs (3.63 kg)
• 5 Gallons (18.72 Liters); 40 lbs (18.14 kg)
• 55 Gallon (208 Liters) Drums; 440 lbs (200 kg)
• 275 Gallon (1040 Liters) Totes 

Downloads

EffLock Powder Admixture Technical Data Sheet
EffLock Powder Admixture MSDS
NewLook EffLock Admixture Specification 04
Which EffLock products are "guaranteed"?

The liquid and powder admixtures are guaranteed to stop efflorescence permanently when they are mixed thoroughly exactly according to instructions. Since NewLook cannot control how well an existing concrete surface is prepared or how porous it is, we cannot offer the same guarantee on EffLock Topical Treatment. Visit our Terms of Use webpage for all the legal mumbo-jumbo.

Does EffLock comply with ASTM?

EffLock Complies With:
• ASTM C-33 Normal Weight Aggregates
• ASTM C-150 For Portland Cement
• ASTM C-55 Grade N Concrete Brick
• ASTM C-145 Grade N Solid Load Bearing Unit
• ASTM C-90 Grade N Hollow Load Bearing Unit
• ASTM C-494/494M For Hydraulic Cement

While NewLook cannot distribute the specific internal data from testing EffLock, we invite customers to request a complimentary product sample for the purposes of confirming NewLook's strong product claims. 
Can you use other admixtures in concrete treated with EffLock?

Yes, you can use any other admixture or additive with EffLock in concrete and masonry. EffLock should be the FIRST admixture used to ensure proper reaction. Once EffLock is mixed properly, you can use any additive you want. In fact, EffLock will improve the performance of many other admixtures.
 Can you seal EffLock-treated surfaces with a top coat, film-forming sealer?

Yes, with NewLook-approved sealers like SmartSeal. Some top coat sealers can inhibit breathability. It is not recommended that you use hot solvent based sealers, such as methyl methacrylates, as their flash point is too low and can cause the blushing. Depending on job site conditions, give EffLock sufficient time to cure before installing a top coat sealer.